The SN2200 is rated for a nominal output power of 2.2 kW, suitable for driving standard three-phase AC induction pumps or permanent magnet pumps. Its input side is designed to accept a wide DC voltage range from solar arrays, typically spanning 200 V to 450 V DC, allowing flexible panel configuration. The maximum PV input power is generally 3.0 kW to accommodate oversizing of the array for cloudy days. The inverter features a robust Maximum Power Point Tracking (MPPT) algorithm with an efficiency exceeding 99%, ensuring maximum energy harvest from the solar panels under varying irradiance and temperature conditions.
Structurally, the Novem solar pump inverter is typically housed in a rugged, weatherproof enclosure rated for outdoor installation. It is designed to operate over a wide ambient temperature range, making it suitable for hot desert climates as well as cooler temperate regions. The internal architecture includes insulated-gate bipolar transistor (IGBT) modules, digital signal processors, and protective circuits that safeguard against overvoltage, undervoltage, overcurrent, overheating, dry-running, and phase loss. Many Novem models feature a built-in LCD display and a simple keypad interface, allowing users to monitor system parameters such as input voltage, generated current, pump speed, total energy yield, and fault codes. Some advanced versions also offer remote monitoring and control via RS485 communication, Bluetooth, or optional Wi-Fi modules, enabling real-time data access through a smartphone app or a centralized management platform.
The increasing demand for renewable energy solutions has driven remarkable advancements in solar-powered systems, particularly in water pumping for agriculture, remote living, and If you have any kind of inquiries regarding where and ways to make use of Newpro solar Inverter, you could call us at the web page. environmental management. Among the leading technologies in this field is the INVT BPD series solar pump inverter, a sophisticated power electronics device that converts variable direct current (DC) output from solar panels into controlled alternating current (AC) to drive water pumps. Developed by Shenzhen INVT Electric Co., Ltd., a globally recognized manufacturer of industrial variable frequency drives and solar products, the BPD series combines robust engineering, intelligent control, and practical design to deliver highly efficient and reliable water delivery solutions without relying on grid power or batteries.
The INVT solar pump inverter is a specialized power conversion device designed to operate water pumps using solar photovoltaic (PV) energy. Developed by INVT Electric, a global leader in industrial automation and power electronics, this inverter serves as the intelligent interface between solar panels and pump motors. Its primary function is to convert the variable direct current (DC) generated by PV arrays into a stable, controlled alternating current (AC) to drive standard three-phase induction pumps. By doing so, it eliminates the need for grid electricity or diesel fuel, making water pumping systems cost-effective, environmentally friendly, and suitable for remote or off-grid locations.
The BPD series is available in a broad range of power ratings, typically from 0.75 kW to 90 kW, making it suitable for various pump sizes and head/flow requirements. Input voltage options are designed to match common PV array configurations, such as 110V, 220V, 380V, and 500V DC, providing flexibility for system designers. The output is a variable-frequency AC supply, typically three-phase, with a frequency range that can be adjusted from 0 to 150 Hz or higher, depending on the model. This allows the pump to start softly and accelerate gradually, reducing mechanical stress and avoiding water hammer effects. During periods of low solar radiation, the inverter lowers the output frequency, enabling the pump to run at reduced speed rather than stopping completely, thus maximizing the total pumping volume per day.
Brand reputation and quality are paramount. Well-known international brands like Grundfos, ABB, and Schneider Electric command premiums due to their reliability, warranty, and after-sales support. In contrast, local or lesser-known brands may offer lower prices but potentially compromise on durability. In Thailand, where the term "ราคา" is commonly used, both imported and locally assembled inverters are available, with a wide price spectrum.
The hybrid mode, supported by select Novem models, integrates a charge controller that prioritizes solar energy for pumping while using excess energy to charge batteries. In the absence of sunlight, the inverter can draw power from the batteries to operate the pump, providing uninterruptible water supply. This is particularly beneficial in regions with intermittent cloudy days or for applications requiring nighttime irrigation. The inverter manages the transition between solar and battery power smoothly, ensuring a steady water flow.
From an economic perspective, the SN2200 reduces the total cost of ownership by maximizing solar energy use and lowering grid electricity consumption. In many regions, the system can achieve a simple payback period of two to four years, especially where diesel fuel is expensive or grid power is unreliable. The robust hybrid design also minimizes downtime and pump repair costs, as soft-start and dry-run protection extend motor life. Environmentally, each 2.2 kW inverter can offset approximately 3,000 kg of CO2 emissions per year when displacing fossil-fuel-derived electricity, contributing to climate change mitigation.
Structurally, the Novem solar pump inverter is typically housed in a rugged, weatherproof enclosure rated for outdoor installation. It is designed to operate over a wide ambient temperature range, making it suitable for hot desert climates as well as cooler temperate regions. The internal architecture includes insulated-gate bipolar transistor (IGBT) modules, digital signal processors, and protective circuits that safeguard against overvoltage, undervoltage, overcurrent, overheating, dry-running, and phase loss. Many Novem models feature a built-in LCD display and a simple keypad interface, allowing users to monitor system parameters such as input voltage, generated current, pump speed, total energy yield, and fault codes. Some advanced versions also offer remote monitoring and control via RS485 communication, Bluetooth, or optional Wi-Fi modules, enabling real-time data access through a smartphone app or a centralized management platform.
The increasing demand for renewable energy solutions has driven remarkable advancements in solar-powered systems, particularly in water pumping for agriculture, remote living, and If you have any kind of inquiries regarding where and ways to make use of Newpro solar Inverter, you could call us at the web page. environmental management. Among the leading technologies in this field is the INVT BPD series solar pump inverter, a sophisticated power electronics device that converts variable direct current (DC) output from solar panels into controlled alternating current (AC) to drive water pumps. Developed by Shenzhen INVT Electric Co., Ltd., a globally recognized manufacturer of industrial variable frequency drives and solar products, the BPD series combines robust engineering, intelligent control, and practical design to deliver highly efficient and reliable water delivery solutions without relying on grid power or batteries.
The INVT solar pump inverter is a specialized power conversion device designed to operate water pumps using solar photovoltaic (PV) energy. Developed by INVT Electric, a global leader in industrial automation and power electronics, this inverter serves as the intelligent interface between solar panels and pump motors. Its primary function is to convert the variable direct current (DC) generated by PV arrays into a stable, controlled alternating current (AC) to drive standard three-phase induction pumps. By doing so, it eliminates the need for grid electricity or diesel fuel, making water pumping systems cost-effective, environmentally friendly, and suitable for remote or off-grid locations.
The BPD series is available in a broad range of power ratings, typically from 0.75 kW to 90 kW, making it suitable for various pump sizes and head/flow requirements. Input voltage options are designed to match common PV array configurations, such as 110V, 220V, 380V, and 500V DC, providing flexibility for system designers. The output is a variable-frequency AC supply, typically three-phase, with a frequency range that can be adjusted from 0 to 150 Hz or higher, depending on the model. This allows the pump to start softly and accelerate gradually, reducing mechanical stress and avoiding water hammer effects. During periods of low solar radiation, the inverter lowers the output frequency, enabling the pump to run at reduced speed rather than stopping completely, thus maximizing the total pumping volume per day.
Brand reputation and quality are paramount. Well-known international brands like Grundfos, ABB, and Schneider Electric command premiums due to their reliability, warranty, and after-sales support. In contrast, local or lesser-known brands may offer lower prices but potentially compromise on durability. In Thailand, where the term "ราคา" is commonly used, both imported and locally assembled inverters are available, with a wide price spectrum.
The hybrid mode, supported by select Novem models, integrates a charge controller that prioritizes solar energy for pumping while using excess energy to charge batteries. In the absence of sunlight, the inverter can draw power from the batteries to operate the pump, providing uninterruptible water supply. This is particularly beneficial in regions with intermittent cloudy days or for applications requiring nighttime irrigation. The inverter manages the transition between solar and battery power smoothly, ensuring a steady water flow.
From an economic perspective, the SN2200 reduces the total cost of ownership by maximizing solar energy use and lowering grid electricity consumption. In many regions, the system can achieve a simple payback period of two to four years, especially where diesel fuel is expensive or grid power is unreliable. The robust hybrid design also minimizes downtime and pump repair costs, as soft-start and dry-run protection extend motor life. Environmentally, each 2.2 kW inverter can offset approximately 3,000 kg of CO2 emissions per year when displacing fossil-fuel-derived electricity, contributing to climate change mitigation.
